Protection Of Pipelines From Freezing

A heater "Frost pipe" is a way to keep pipes safe from freezing and maintain the desired temperature within the pipes. To get effective heat, you can also install pipeline heating systems through bruestcatalyticheaters.com/project/twin-pak-pipeline-heater.

This is the heating cable, a segment of length with a particular structure of installed capacity designed to work with the AC voltage of 220 V at 50 Hz. Thermostat wire equipment (RCD Magnetic starters RCD) is installed in the CC (control cabinet) and the box for mounting (connection to connect branches, connection to connecting); Folgoskotch – self-adhesive aluminum tape and insulation.

It is placed at the points needed to avoid freezing of stormwater or sewer pipes. It is also when it is necessary to keep a certain temperature within the pipes by using warm water, or additional fluid.

The heated pipelines are located beneath and above the ground, in the depth of the frozen ground. They are particularly susceptible to direct impact from cold, so it is essential to make sure that they are properly insulated. The pipeline that is installed after the installation of the heater must be correctly protected.

Since the insulation is composed of various components like Sozopol Energoflex and mineral wool. In terms of thickness, the insulation layer can be as thick as 10 mm or greater. This insulation needs to be kept dry by moisture. If it is not it will cause a reduction in the heating insulation.

There are many ways to position heating cables onto the pipe's surface. The heating cable can be laid straight, spirally, or by turning multiple times.